Vestnik On-line
Orenburg State University december 07, 2021   RU/EN
Headings of Vestnik

ЭБС Лань
Лицензия Creative Commons

April 2015, № 4 (179)

Bulatasov E.O., Popov V.P., Hanin V.P. MATHEMATICAL MODEL OF WOOD MILLINGThe complexity of the process of cutting wood creates objective difficulties of obtaining a complete and accurate analytical description of the relations between the baseline and performance indicators cutting. To ensure the adequacy of the laws established by theory and experiment, the analysis of the process of cutting the wood necessary to consider many factors, first and foremost — the viscoelastic characteristics of the material being processed. An analysis of the forces from the blade by a timber for cutting the three main directions found that using compressive and tensile stresses occurring in the material being processed in the interaction with a cutter, it is possible not only to describe the process of cutting the wood to cut the three principal directions, and significant differences explain why the cutting force values for these cases, without using such a thing as chopping wood when cutting. It is expected that after cutting the thinnest shavings sharp cutter, the thickness of which is comparable to the radius of the rounding of the blade for wood cutter action to a greater extent can be reduced to the action of the blade, and the action of the front face, since small quantities, can be neglected. The study the mathematical model developed using the mathematical apparatus of rheology, which in theory wood cutting is a new method of mechanics-mathematical analysis, a formula for determining the amount of force cutting wood.Key words: mathematical model, milling wood, rheological model, rheological equation, cutting force.


1. Lubchenko V.I. Cutting wood and wood materials. M.: Forest Industry, 1986. — 296 p.

2. Churilin A.A. New in cutting wood. M.: Forest Industry, 1967. — 122 p.

3. Zotov G.A., Pamfilov E.A. Increasing resistance of wood — cutting tools. M.: Ecology, 1991. — 304 p.

4. Ugolev B.N. Wood from the forest — based merchandising. M.: Forest Industry, 1986. — 368 p.

5. Rouzen B. Destruction of solid polymers. M.: Chemistry, 1971. — 528 p.

6. Ivanovsky E.G., Vasilevskaya P.V., Lautner E.M. Milling and sawing wood and wood materials. M.: Forest Industry, 1971. — 96 p.

7. Anastasiev A.A., Arkhipov N.N., Zharov A.N., Kornilov V.P., Storozhev V.V. Machines, machine — guns and automatic lines of light industry. M.: Light and Food Industry, 1983. — 352 p.

8. Abramov V.F., Sokolov V.N., Tatarchuk I.R., Litvin E.V. Technology and modeling of cutting processes in the apparel and footwear industry. M.: Moscow State University of Design and Technology, 2003, p. 274-281.

9. Reznick N.E. Theory of cutting blade and the basis of calculation of cutting machines. M.: Engineering, 1975. — 311 p.

10. Uspassky P.P. Wood and its processing. Handbook aeronautical engineer. M.: Oborongiz, 1946. — 412 p.

11. Berdinskih I.P., Kuznetsov M.A. Production of wooden planes. M.: Oborongiz, NKAP, 1945. — 394 p.

12. Ivanovsky E.G. Cutting the wood. M.: Forest Industry, 1974. — 200 p.

13. Modlin B.D., Hatilovich A.A. Production of chips for chipboard. M.: Forest Industry, 1988. — 152 p.

14. Demidov Y.M. Chopping wood for the production of chipboard. M.: Forest Industry, 1974. — 144 p.

15. Bershadsky A.L. Cutting the wood. M.: Goslesbumizdat, 1956. — 328 p.

About this article

Authors: Popov V.P., Hanin V.P.

Year: 2015

Sergey Aleksandrovich

© Электронное периодическое издание: ВЕСТНИК ОГУ on-line (VESTNIK OSU on-line), ISSN on-line 1814-6465
Зарегистрировано в Федеральной службе по надзору в сфере связи, информационных технологий и массовых коммуникаций
Свидетельство о регистрации СМИ: Эл № ФС77-37678 от 29 сентября 2009 г.
Учредитель: Оренбургский государственный университет (ОГУ)
Главный редактор: С.А. Мирошников
Адрес редакции: 460018, г. Оренбург, проспект Победы, д. 13, к. 2335
Тел./факс: (3532)37-27-78 E-mail:
1999–2021 © CIT OSU