Kanygina O.N., Anisina I.N., Davletbakov R.R. BRITTLE FAILURE OF THE CERAMIC MATERIAL, REINFORCED WITH SIC-PARTICLESThe parameters of the brittle failure ceramic material reinforced with silicon carbide particles is investigated. It is established that the maximum strength and minimum rate of crack propagation is achieved by variation of the internal parameters and firing optimization.Key words: brittle failure, montmorillonite containing clay, composite ceramic material, carbide of silicon.
References:
1. Numerical simulation of spall fracture of metals / B.L. Glushak, I.R. Trunin, S.A. Novikov [et al.] ; edited by A.B. Dubinova // Fractals in Applied Physics. — Arzamas-16: VNIIEF, 1995. — P. 59–122. — ISBN 5-85165-064-8.
2. Zhurkov, S.N. Dilatons mechanism of the strength of solids. Prince. Physics of Strength and Plasticity / S.N. Zhurkov. — Leningrad: Nauka, 1986. — P. 5–10.
3. Zhurkov, S.N. Physical basis of the strength / S.N. Zhurkov. — М.: Znanie, 1973. — P. 177–195.
4. Kanygina, O.N. The physical aspects of thermal stability of the oxide ceramic / O.N. Kanygina. — Bishkek: KRSU, 2003. — 192 p.
5. Vettegren, V.I. Physical basis of the kinetics of degradation of materials / V.I. Vettegren, S.O. Lazarev, V.A. Petrov. — L. — 1989. — 246 p.
6. Anisina, I.N. Synthesis of siliceous ceramics. The analysis of physical and chemical processes in the production of ceramics from montmorillonite clay / I.N. Anisina, A.G. Chetverikova, O.N. Kanygina. — LAP LAMBERT Academic Publishing, 2012. — 92 p. — ISBN 978-3-8454-2805-5.
7. Bakunov, V.S. The technology of ceramics from the point of synergy (review) / V.S. Bakunov, A.V. Belyakov // Glass and Ceramics, 2005. — № 3. — P. 10–13.
8. Belyakov, A.V. Preparation of transparent ceramics. Synergistic Approach (review) / A.V. Belyakov // Glass and Ceramics, 2009. — № 12. — P. 18–25.
9. Montmorillonite containing clay from Orenburzhye as the raw material for functional ceramics / Kanygina O.N. [et al.] // Vestnik OGU. — 2013. — № 10. — P. 354–356.
10. Strehlov, K.K. Structure and properties of refractories / K.K. Strelov. — M.: Metallurgia, 1972. — 216 p.
11. Pushkarev, O.I. Investigation of the surface strength and high hard crack stability of ceramic materials by micro indentation / O.I. Pushkarev // Refractory and Technical Ceramics, 2002. — № 10. — P. 18–21.
12. Krasulin, J.L. The structure and fracture of materials from powders of refractory compounds / Y.L. Krasulin, S.M. Barinov, V.S. Ivanov. — M.: Nauka, 1985. — 254 p.
13. Kotlyar, T.A. The influence of silicon carbide on the thermo-physical and mechanical properties of siliceous ceramics: syn. dis.... candidate f.-m. sciences: 01.04.14 / Tatiana Kotlyar. — Bishkek, 2000. — 21 p.
14. Kanygina, O.N. Thermal activation of thermal processes of structural change in ceramics: sen. dis.... dr. f.-m. sciences: 01.04.14 / Olga Kanygina. — Bishkek, 2005. — 45 p.
15. Kanygina, O.N. The influence of the content and types of silicon carbide on the structure and defects of siliceous ceramic / O.N. Kanygina, T.A. Kotlyar // Defectoscopia. — RAN. — 2005. — № 8. — P. 93–98.
16. Babushkin, V.I. Thermodynamics of silicates / V.I. Babushkin, G.M. Matveev, O.P. Mchedlov-Petrosyan ; ed. O.P. Mchedlov-Petrosyan. — М.:Stroyizdat, 1972. — 351 p.
About this article
Authors: Kanygina O.N., Anisina I.N., Davletbakov R.R.
Year: 2014
|