|
|
|
Fot А.P. THE ESTIMATION OF CONSTRUCTIVE-TECHNOLOGICAL PERFECTION OF DRIVE CHAINS GEARS OF MOTOR DRIVES The author presented results of the analysis of the characteristics of the drive plate circuits used in mechanical drive trucks, the criterion of evaluation of design and technological excellence chains.Key words: chain transfer, chain drive plate, breaking load, the criterion of evaluation circuits.
References:
1. Vorob'ev, NV The chain of transmission: a monograph / NV Sparrows. — Moscow: Mashinostroenie, 1968. — 262 p.
2. Glushchenko, IP Fundamentals of chain drives with a sleeve-roller chains: monograph / IP Glushchenko. — Lviv: Publishing House of Lviv University, 1964. — 226 p.
2. GOST 13568-97. Driving roller chain and the bush. General specifications. — Moscow: Publishing House of Standards, 1975. — 21 s.
4. GOST 13552-81. Chain, cogged. Specifications. — Moscow: Publishing House of Standards, 1981. — 10.
5. Gotovtsev, AA Design of chain drives: a handbook / AA Gotovtsev, IP kitten. — Moscow: Mashinostroenie, 1982. — 336.
6. Ivashkov, I. Leaf chains: monograph / I.I.Ivashkov. — Moscow: Mashgiz, 1960. — 264.
7. Petrik, AA Roller chain drives engineering application. Calculation of load capacity: recommendations / A. Petric, J. P. Glushenko, SA Metilkov etc. — Krasnodar: KPI, 1991. — 65.
8. Stolbin, GB The choice of a rational method of calculating the transmission chain for wear. In the book.: New design, technology and specialization of production chains / Ed. II Ivashkova. — M.: Cynthia, 1964. — S. 66-74.
About this article
Author: Fot A.P.
Year: 2012
|
|
Editor-in-chief |
Sergey Aleksandrovich MIROSHNIKOV |
|
|