Timofeeva D.V., Popov V.P., Antimonov S.V., Zinyukhina A.G.
DEVELOPMENT OF SCREW DESIGN OF STANDARD EXTRUDER ^{[№ 9 ' 2014]}
On the basis of experimental research design is proposed to develop a working body press extruder for the production of foodstuffs. This construction provides the ability to control the feed rate of the material in the compression zone, by adjusting the angle of the screw revolutions. Thus, the proposed modification of the working body of the press extruder allow: to optimize the process, improve the performance of the extruder and receive high quality extrudates. In research work carried out the conversion of pasta in each zone in terms of its density and, consequently, strength.

Timofeeva D.V., Zinyukhina A.G., Popov V.P., Korotkov V.G., Antimonov S.V.
OPTIMIZATION OF THE CHANGES OF THE AGGREGATIVE STATE OF MATERIALS IN THE EXTRUSION PROCESS ^{[№ 3 ' 2013]}
On the basis of the pilot research is proposed to develop Saving Technologies extruded products including adhesive-cohesive interactions permits substantive reduce energy and resource consumption in the production process. This paper investigated the effect of extrusion process various kinds of agricultural raw materials to changes in the physical-chemical, structural, and mechanical properties of the materials being processed.

Sokolova O.Ya., Stryapkov A.V., Antimonov S.V., Solovykh S.Yu.
HEAVY METALS IN THE SYSTEM ELEMENT – SOIL – GRAINS ^{[№ 4 ' 2006]}
The influence of different factors on heavy metals content in some types of grains is researched in this article. General results of mineral structure are analyzed here too.

Sokolova O.Ya., Stryapkov A.V., Antimonov S.V., Solovykh S.Yu.
INFLUENCE OF MAN-CAUSED IMPACT ON CONTENT OF GROSS AND ACTIVE FORMS OF HEAVY METALS IN SOIL ^{[№ 2 ' 2006]}
The content of gross and active forms depending on the degree of man-caused impact is researched in this article.

Sokolova O.Ya., Stryapkov A.V. , Antimonov S.V., Solovyh S.Ju.
INFLUENCE OF EXTRUSION TECHNOLOGY FACTORS ON SORPTIVE ABILITY OF GRAINS ^{[№ 10 ' 2005]}
In the article sorptive ability of grain`s extruded article is investigated, received at various thermal processing, in relation to heavy metals.

Sokolova O.Y., Stryapkov A.V., Antimonov S.V., Solovyh S.J.
INFLUENCE OF EXTRUSION PREPARATION WAYS OF THE BRAN ON THE CONTENTS IN IT OF MOBILE FORMS OF HEAVY METALS ^{[№ 6 ' 2005]}
In the article the behavior of mobile forms of heavy metals is investigated depending on modes of extrusion processing of bran.

Sokolova O.Y., Stryapkov A.V., Antimonov S.V., Solovyh S.J.
INFLUENCE OF EXTRUSION PREPARATION WAYS OF THE GRAIN ON THE CONTENTS IN IT OF MOBILE FORMS OF HEAVY METALS ^{[№ 5 ' 2005]}
The article is devoted to the questions of manufacture of "ecologically safe" forages for animals. The role of ions of metals is examined in the article in physiological processes occurring in an organism of an animal at feeding. In the article the classification is given of the brightest representatives of heavy metals in foodstuff on their prevalence and toxicity. Authors offer to carry out an estimation of a forage "safety" by the original technique developed by them which consists in change observation of the acid-soluble forms contents of heavy metals at their transition from a product to a solution.

Holodilina T.N., Antimonov S.V., Hanin V.P.
RESEARCH OF OPPORTUNITIES OF NUTRITIONAL VALUE INCREASE OF BUCKWHEAT HUSK ^{[№ 10 ' 2004]}
At processing of a buckwheat grain in groats up to 22% from a total load of feed stock a husk forms. Now known ways of its recycling do not find use. In the article the way of processing of a waste is considered which allows to lower quantity of cellulose and to improve parameters characterizing the nutritional value of a waste that will allow to use it as a component of feed mixture.

Korotkov V.G., Ganin E.V., Antimonov S.V., Solovyh S.U.
MODELING OF THE PROCESS OF MIXTURE WITH SIMULTANEOUS BREAKAGE OF THE FEED MIXTURES. ^{[№ 5 ' 2004]}
Modern conditions of preparing of feed in small and middle farms, tendencies of machine development for recycling of grain - products are viewed in the article, kinetics of the process of mixturing by attendant breakage of grain components and power, expended on this process on the basis of halfemperic model of movement of sphere in mixer of chemical production is described.

Stryapkov A.V., Antimonov S.V., Sokolova O.J.
EXTRUSION PROCESSING AS "ENVIRONMENTALLY SAFE" PRODUCTION FACTOR OF GOODS FROM GRAIN AND DERIVATIES ^{[№ 2 ' 2004]}
The article considers the problem of getting feed-stuffs designed for feeding agricultural animals by extrusion grain wastages processing and VMR from "environmental safety" point of view, which is estimated through heavy metals content in original material and end-product.

S.V. Antimonov, S.P. Vasilevskaya
THE SOLUTION WAYS OF WASTE TREATMENT PROBLEMS IN BREAD PRODUCTS BRUNCH. ^{[№ 1 ' 2003]}
The article deals with the method of evaluation of waste treatment seeds in the enterprises. It is based on the analyses of these waste structures, complex registration of effectivity, absence of waste in the technological processes with the registration of deep treatment of raw materials and ecology production.

^{[№ 5 ' 2002]}

Antimonov S.V., Sokolova O.Y.
SOURCES OF GRAIN-TREATING INDUSTRY WASTES ^{[№ 3 ' 2002]}
The article considers sources of grain-treating industry wastes and analyses basic processing operations taking into account the wastes percentage in the overall turn-over of the enterprise. In conclusion the authors write about the expediency of processing wastes into "ecologically clean" products.

S.V. Antimonov, N.V. Zaitzeva
SPEAKING ON THE DEFINITION OF CRUSHING MATERIAL MASS IN AIR-PRODUCTIONAL LAYER OF CRUSHING MACHINE ^{[№ 2 ' 2000]}
It is suggested the approximate method of determination of grain and its crumbled products mass which makes the air-productional layer near the sieve of crushing machine which can be used for mathematical model identification of grain crushing process for mixed fodder.