Vestnik On-line
Orenburg State University july 18, 2024   RU/EN
Headings of Vestnik
Pedagogics
Psychology
Other

Search
Vak
Антиплагиат
Orcid
Viniti
ЭБС Лань
Rsl
Лицензия Creative Commons

May 2024, № 2 (242), pages 96-110

doi: 10.25198/1814-6457-242-96

Semagina Yu.V., Vanchinova M.A. ASSESSMENT OF THE STATE OF THE BASIC LEVEL OF GEOMETRIC-GRAPHIC TRAINING IN TECHNICAL UNIVERSITIESThe training of competent engineering personnel is dictated, first of all, by the need to ensure the technological sovereignty of Russia. The basis for high-quality training of specialists in technical fields should be a block of geometric and graphic disciplines. The purpose of the study was to determine the criteria for ensuring the formation of a basic level of geometric-graphic training. Methods of simulation modeling and statistical processing of experimental data, involving visual and geometric methods of analysis, were used as the instrumental basis for the research. A study of literary sources has shown that in almost all technical specialties at universities in Russia and neighboring countries, the block of humanities disciplines is increasing at the expense of technical disciplines. These include the disciplines of the graphic cycle. Various methods of intensifying the educational process for a number of reasons do not achieve the desired result. This is clearly illustrated by the results of assessing the influence of the pre-university component of geometric-graphic training on the subsequent performance of technical students. An analysis of the influence of the results of the unified state exam on the results of teaching graphic cycle disciplines was carried out. The influence on learning outcomes of the amount of contact work at a university, its distribution over semesters, and the presence of “cocktail” disciplines in the geometric-graphic block was revealed. An assessment of the state of geometric-graphic training in technical universities was carried out using the example of Orenburg State University. We have proposed a method for forming the content of a block of geometric and graphic training for specialists in technical fields. It is necessary to highlight descriptive geometry, technical drawing and computer graphics in the block of courses, and these names of disciplines should be “legalized”. It is necessary to rely on the conditions for improving the quality of geometric and graphic training in universities, without which modern training of competent engineering personnel is impossible.Key words: technological sovereignty, geometric-graphic disciplines, graphic training, descriptive geometry, technical drawing, computer graphics, passing grade, independent work.

Download
References:

1. (2023) Russian universities will switch to a new education system by 2026. What changes await students. rg.ru: Rossiyskaya Gazeta. July 6. URL: https://rg.ru/2023/06/07/ushla-na-bazu.html?ysclid=lrby322dfy965852348 (access date: 01/13/2024).

2. (2022) Six key tasks in the Russian economy for 2023. Transcript of Vladimir Putin’s speech at a meeting of the Council for Strategic Development and National Projects. rg.ru: Rossiyskaya Gazeta. December 15. URL: https://rg.ru/2022/12/15/stenogramma-vystupleniia-vladimira-putina-na-zasedanii-soveta-po-strategicheskomu-razvitiiu-i-nacionalnym-proektam.html (access date: 15.02.2024).

3. (2023) The Cabinet of Ministers will expand the system of advanced engineering schools to 50 universities. rg.ru: Rossiyskaya Gazeta. December 11. URL: https://rg.ru/2023/12/11/kabmin-rasshirit-sistemu-peredovyh-inzhenernyh-shkol-do-50-vuzov.html?ysclid=ltsiv43be0970722380 (access date: 02/15/2024).

4. Chernikov A.V. (2019) The Bologna education system as a means of destroying Russian civilization. URL: https://danilevsky.ru/wp-content/uploads/2019/07/17-Chernikov-AV-Bolonskaya-sistema-obrazovaniya.docx

5. Gordon V.O. (1951) Drawing flat and spatial figures. A manual for teachers. Moscow: Uchpedgiz, 264 p.

6. Mironov V.V. (2017) University education: conservatism or innovation. Bulletin of Moscow University, vol. 23, No. 4, pp. 32–44. DOI: 10.24290/1029-3736-2017-23-4-32-44

7. Hawking S. (2019) On the shoulders of giants. M.: AST Publishing House, 256 p.; ISBN 978-5-17-982752-8

8. Usanova E.V. and Rukavishnikov V.A. (2018) Basic geometric and graphic training of specialists in the field of engineering and technology: monograph. Kazan: Editorial and publishing department. KSPEU, 125 p. ISBN 978-5-89873-516-6

9. Tikhonov-Bugrov D.E. and Abrosimov S.N. (2022) Engineering graphics in the light of parting with the Bologna Agreement. Geometry and graphics, vol. 10, No. 3, pp. 45–53.

10. Bocharova I.N. and Demidov S.G. (2018) About the content of the engineering graphics course at the Moscow State Technical University named after N.E. Bauman. Pedagogy. Questions of theory and practice, No. 2(10), pp. 5–8. DOI: 10.30853/pedagogy.2018-2.1

11. Kuchkarova D.F. and Achilova D.A. (2018) Quality Management of Engineering Graphics Teaching. In: Cocchiarella, L. (ed.) ICGG 2018 — Proceedings of the 18th International Conference on Geometry and Graphics. ICGG 2018. Advances in Intelligent Systems and Computing, vol 809. Springer, Cham. URL: https://doi.org/10.1007/978-3-319-95588-9_145

12. Oyuunjargal Ch. and Oyuunzayaa E. (2022) Trends in teaching in engineering graphics. Geometry and graphics, vol. 10, No. 2, pp. 53-59. URL: https://doi.org/10.12737/2308-4898-2022-10-4-35-45.

13. Lepparov M.N. and Popov M.Kh. (2014) State and trends of geometric-graphic training as components of engineering education in Bulgaria. Geometry and graphics, vol. 2, No. 1, pp. 22–29.

14. Kuzembaev S., Alzhanov M., Tuleuova G. and Elibaeva L. (2022) Training of bachelors in the field of “Descriptive Geometry and Graphics” in the Republic of Kazakhstan. In: Cheng, LY. (ed.) ICGG 2022 — Proceedings of the 20th International Conference on Geometry and Graphics. ICGG 2022. Lecture Notes in Data Engineering and Communication Technologies, Volume 146. Springer, Cham. URL: https://doi.org/10.1007/978-3-031-13588-0_82

15. Jingying Z., Xianying T. and Wei Y. (2017) Investigation and Research on the Current Graphics Education Situation in the Internet Age. Journal of Graphics, 38(6), p. 12. URL: http://www.txxb.com.cn/EN/10.11996/JG.j.2095-302X.2017060919 (date of access: 03/18/2024).

16. Kuљar D., Volgemut M. and Pletenac L. (2018) Digitizing Spatial Visualization Tests. International Conference on Geometry and Graphics. 40th Anniversary. Milan, Italy, August 3-7, pp . 1631–1642. URL: https://link.springer.com/chapter/10.1007/978-3-319-95588-9_146

17. Cumino C., Calvano M., Spreafico M.L. and Zich U. (2018) Teaching Geometry and Surfaces Evaluation Through Graphic Representation and Dynamic Paper Models. International Conference on Geometry and Graphics. 40th Anniversary. Milan, Italy, August 3-7, pp. 1523–1532. URL: https://link.springer.com/chapter/10.1007/978-3-319-95588-9_135

18. Dobelis M., Polinceusz P., Sroka-Bizoń M., Tytkowski K., Velichova D. and Vansevicius A. (2018) Is the Constructional Drawing an International Language for Engineers? International Conference on Geometry and Graphics. 40th Anniversary. Milan, Italy, August 3-7, pp. 1542–1552. URL: https://link.springer.com/chapter/10.1007/978-3-319-95588-9_137

19. Buslenko V.N. (1977) Automation of simulation modeling of complex systems. Ed. and afterword by N.P. Buslenko. Moscow: Nauka, 239 p.

20. Guseva E.N. (2008) Economics o-mathematical modeling: textbook. M.: Flinta, 216 p.; ISBN 978-5-89349-976-6

21. Mityukov, N.V. (2007) Simulation modeling in military history. Moscow: URSS, 279 pp.; ISBN 978-5-382-00068-8

22. Shannon R. (1978) Simulation modeling of systems — art and science. Transl. from English. Ed. by E.K. Maslovsky. Moscow: Mir, 418 p.: ill.; 22 cm

23. Moises B.B., Plotnikova I.V. and Redko L.A. (2024) Statistical methods of quality control and processing of experimental data: a textbook for universities. 2nd ed. Moscow: Yurayt Publishing House, 118 p. ISBN 978-5-534-11906-0. — ISBN 978-5-4387-0700-4

24. Shakalo D.N., Goncharov A.V. and Ivanyuga T.V. (2024) Fundamentals of statistical analysis: textbook for universities. St. Petersburg: Lan, 92 p. ISBN 978-5-507-48378-5.

25. Brant Z. (2003) Data analysis: statistical and computational methods for scientists and engineers. Lane from English O.I. Volkova; edited by E.V. Chepurina. Moscow: Mir: AST, 686 p.: ill.; 24 cm. ISBN 5030034781

26. Mkhitaryan V.S. et al. (2024) Data analysis: textbook for universities. Moscow: Yurayt Publishing House, 490 p. ISBN 978-5-534-00616-2.

27. Kosareva A. (2023) Average Unified State Examination score in subjects over the last 10 years: what’s next. blog.maximumtest.ru: MAXIMUM Education, September 28. URL: https://blog.maximumtest.ru/post/srednij-ball-egeh-po-predmetam.html (access date: 04/15/2024).

28. Fu-Chuen C., Mong-Na Lo H. , Dennis L.K.J. and Huie-Ching Y. (2001) Optimal designs for dual response polynomial regression models. Journal of Statistical Planning and Inference, 93, pp. 309–322.

29. Cross-platform solution for fitting curves and data analysis. CurveExpert Professional. URL: https://www.curveexpert.net (access date: 03/18/2024).

30. Order of the Federal Service for Supervision in the Sphere of Education and Science dated 04/01/2022 N 778-10. obrnadzor.gov.ru: Federal Service for Supervision in the Sphere of Education and Science. URL: https://obrnadzor.gov.ru/wp-content/uploads/2022/04/metodika-shkalirovaniya-s-izmeneniyami-2022-goda.pdf (access date: 02/15/2024).

31. Semagina Yu.V. and Vanchinova M.A. (2023) On the problems of teaching geometric and graphic disciplines in the context of reforming the higher education system. University complex as a regional center of education, science and culture: Sat. materials Vseros. scientific method. Conf., Orenburg, January 26-27. 2023. Orenburg. state University; ed. A. V. Pykhtin. Orenburg: OSU, pp. 2810-2814.

32. Kostryukov A.V. and Semagina Yu.V. (2019) Independent work of students as an object of educational methodology for teaching geometric and graphic disciplines. Scientific and methodological electronic journal “Concept”, No. 8 (August), pp. 50–61. URL: http://e-koncept.ru/2019/191056.htm

33. Kostryukov A.V. and Semagina Yu.V. (2018) Geometric-graphic language as the basis for organizing the educational process in the formation of graphic culture of a university student. Scientific and methodological electronic journal “Concept”, 2018, No. 5 (May), pp. 28–39. URL: http://e-koncept.ru/2018/181027.htm


About this article

Authors: Semagina Yu.V., Vanchinova M.A.

Year: 2024

doi: 10.25198/1814-6457-242-96

Editor-in-chief
Sergey Aleksandrovich
MIROSHNIKOV

Crossref
Cyberleninka
Doi
Europeanlibrary
Googleacademy
scienceindex
worldcat
© Электронное периодическое издание: ВЕСТНИК ОГУ on-line (VESTNIK OSU on-line), ISSN on-line 1814-6465
Зарегистрировано в Федеральной службе по надзору в сфере связи, информационных технологий и массовых коммуникаций
Свидетельство о регистрации СМИ: Эл № ФС77-37678 от 29 сентября 2009 г.
Учредитель: Оренбургский государственный университет (ОГУ)
Главный редактор: С.А. Мирошников
Адрес редакции: 460018, г. Оренбург, проспект Победы, д. 13, к. 2335
Тел./факс: (3532)37-27-78 E-mail: vestnik@mail.osu.ru
1999–2024 © CIT OSU