Abdrafikov R.N., Polishchuk V.U.
TO THE DEFINITION OF RHEOLOGICAL QUALITIES OF MIXED FODDER IN THE PROCESS OF ITS EXTRUSION. ^{[№ 4 ' 2004]}
The methods of experiment of defining the coefficient of power law of Ostvald - de Vill, describing flow of mixed fodder in a press - plodder are given in the article, and equations for determination of the given figures for 6 recipe of mixed fodder at different technological parameters of the process of extrusion are given.

^{[№ 5 ' 2002]}

R.N.Abdrafikov
DETERMINATION OF EXTRUSION PROCESS PARAMETERES BY USING THE ANALOGUE-DIGITAL TRANSFORMER ^{[№ 2 ' 2002]}
To choose the best parameteres of screw presses and the technological process of extrusion is impossible without knowing reological characteristics of the processed feed. They depend on temperature, humidity and the rate of a displacement. To determine these qualities of raw material during the process of extrusion is necessary to control the temperature around the forming head and to measure the pressure in some sections along the filiere. This method allows to make measurement by using the thermometer of resistance, the tense-resistor, which is glued on the external surface of the filiere, and the analogue-digital transformer.

V.J.Polischuk, R.F. Sagitov, K.A.Fisenko, R.N. Abdrapgikov
MATERIAL RHEOLOGICAL PARAMETERS DETERMINATION BY MEANS OF REVERSE EXTRUSION IN CIRCULAR CHANNEL WITH A MOVABLE WALL. ^{[№ 3 ' 2000]}
The main power of useful resistance forces is spent in the run-off section. Therefore, optimization of the processes is needed to improve extruders single-screw pressed mechanisms used in food industry. It allows to determine rheological parameters of the extruded material in a thin layer with high speeds of the shift when it flows in circular channel (section) with a movable wall.

Sagitov R.F., Abdrafikov R.N.
THE GIVEN ARTICLE CONSIDERS TWO METHODS OF REOLOGICAL FACTOR DELIMITATION OF PRESSED MATARIAL OF VEGITATIVE ORIGIN AS WELL AS METHOD OF RESULT CORRECTNESS CHECKING ^{[№ 2 ' 1999]}
The proposed methods are suitable for delimitation of reological factors of pressed materials of vegitative origin by means of tense and strain states, arising in auger press, were under consideration.